Pile Foundation / Piling Foundation Work and Services

  Pile foundation / Deep Foundation expert company in Surat, Gujarat, India

We are a leading pile foundation / Deep Foundation company in Surat, Gujarat, India. Grimtech is offering high quality piling and load testing services for our clients. Pile foundations are one of the types of deep foundations. We are specialist in piling foundation, Sheet piles, Piles concrete, Timber pile, Steel pile, Bored pile & Bored pile required for high-rise buildings, Commercial building, roads, dams, bridges and many more. Nowadays pile foundation is performed in different types of soil. Grimtech take a special care that has to be performed in foundation for better quality in building. Our professionals deliver the onsite services including the supervision of entire work, project management, and consultancy in planning, designing and complete execution. Due to our strategic and most sincere approach towards each project, we have successfully completed numerous projects for various field.

About Pile Foundations?

Pile is the type of foundation in which thin columns’ are constructed to bear the load of super structure uniformly. It is preferred in construction in which it is very difficult to transfer the load of walls to the strata; pile is one of the best foundations. Basically it carries the load from the structure and distributed uniformly to the ground. Especially in seashore side it resists the uneven settlement in structure.

Pile foundation is a type of deep foundation which is preferred in case of encounter of upper soil strata of lower bearing capacity. In order to transfer the loads of the super structure to a stratum of high bearing capacity deep below the ground such as rock strata pile foundation is used. They are used in case soft/Salty/clayey type of soils.

Piles are available in a variety of sizes, shapes, and materials that enable a particular type of pile foundation to be viable both economically and structurally.

Pile are the part of a structure used to carry and transfer the load of the structure to the bearing ground located at some depth below ground surface. The main components of the foundation are the pile cap and the piles. Piles are long and slender members which transfer the load to deeper soil or rock of high bearing capacity avoiding shallow soil of low bearing capacity the main types of materials used for piles are Wood, steel and concrete. Piles made from these materials are driven, drilled or jacked into the ground and connected to pile caps. Depending upon type of soil, pile material and load transmitting characteristic piles are classified accordingly.

As in such case of soils going for normal foundations may not be possible either from economical point of view or may not be possible at all in case u want to construct near seashore etc., these are the foundations which transfer load to greater depths, where there is strong strata / load reaching that point is minimal. These are pipe shaped; we have different types of pile foundations.

Piles are long and slender members which transfer the load to deeper soil or rock of high bearing capacity avoiding shallow soil of low bearing capacity the main types of materials used for piles are Wood, steel and concrete. Piles made from these materials are driven, drilled or jacked into the ground and connected to pile caps. Depending upon type of soil, pile material and load transmitting characteristic piles are classified accordingly. Pile is also used for tall structures. In pile foundation load coming from the super structure is taken by pile cap and equally distributed in no. of piles. Pile transfers this load in to the soil.

Our Pile foundations department and experience research and development team are continuously designing new and innovative steel-based foundation solutions to satisfy the requirements of individual clients. Each foundation that grimtech supplies is tailored to the specific structure, ground condition and location of the projects.

Function of Pile foundations / Deep Foundation

Pile Foundation is a very important for a strong building

A pile is a type of foundation commonly used in property construction. Piles are used as a substitute for other foundation methods when earth around the property isn’t strong enough to support conventional foundations. Piles are used to stack up more layers of soil and keep them walled in, providing a firmer base. Piles are used to support marine structures and offshore platforms, since they are located over bodies of water. On land, pile are used primarily in locations where poor soil conditions exist.

Pile provide support for structures, transferring their load to layers of soil or rock that have sufficient bearing capacity and suitable settlement characteristics. There are a very wide range of foundation types suitable for different applications, depending on considerations.

The nature of the load requiring support.

  • Ground conditions.
  • The presence of water.
  • Accessibility.
  • Sensitivity to noise and vibration.

 Pile installation
There are piles made of different types of materials used in pile foundation.

Following types of piles are used in pile foundation depending on materials used for piling.

  • Concrete piles
  • Steel Piles
  • Timber Piles
  • Bored pile
  • Sheet piles

Introduction to pile foundations

  • Pile foundation design
  • Load on piles
  • Single pile design
  • Pile group design

Installation-test-and factor of safety

  • Pile installation methods
  • Test piles
  • Factors of safety
  • Chapter

 

This entry was posted in Pile Foundation and tagged , , , , , , , , , , , , , , , , , , , , , , , , . Bookmark the permalink.