Construction Site - Grimtech

Construction Site

0
24/11/2018
Architect, Complex

Share

Facebook Twitter LinkedIn Google +Email

Pile Foundations Design and Pile testing services provider in India

Pile Foundation – Deep Foundation

▶︎ Long bored r.c.c. cast in situ piles upto 1500 mm dia 55 m, using hydraulic rig soilmec SR40, SR60, HR180 & HR205
▶︎ Bcis pile using dmc, rmc, percussion method, shaft dia. 300mm to 1500 mm. In soil & rock.
▶︎ Auger bored piles/ bored under reamed piles 100mm to 900mm dia.
▶︎ Precast prebored r.c.c. pile
▶︎ Bored r.c.c. compaction piles.
▶︎ Diaphragm walls.
▶︎ R. C. C. Box pushing.,pipe pushing /horizontal boring using rat hole technique.
▶︎ Stone columns / soil stabilisation using sand piles / sand drains
▶︎ Driving sheet piles
▶︎ Soil and rock anchors.

Pile Test

▶︎ Soil testing laboratory/ geotechnical investigation.
▶︎ Static pile load test upto 2500t load in compression, pull out, lateral.
▶︎ High Strain Dynamic load Test (HSDT) of pile.
▶︎ Pile integrity test using pdi.
▶︎ Conducting ndt using ultrasonic, rebound hammer, vibration meter, rebar locator.

Grim tech provides a complete range of site pile testing and pile condition reporting services to the construction industry. These services include Pile Integrity Testing (PIT); Dynamic Pile Testing (DPT); Cross Hole Sonic Logging (CHSL); pile length measuring and consultancy on the capacity and serviceability of piles.

The Pile Integrity Testing is cost effective and without time consuming services. It gives peace of mind that a pile or shaft is free of major cracks and voids, prior to construction of the superstructure. This integrity test is one of the methods for assessing the condition of piles or shafts. Dynamic load testing is a cost effective alternative to conventional static load testing for a wide variety of pile types and sites. Instead of costly proof-loading with kentledge or anchor piles, the technique uses a heavy falling weight such as a piling hammer to impart a short duration impact to the pile head, whilst monitoring the pile response using temporarily attached transducers. Cross Hole Sonic Logging is used to detect and defects in concrete structures and in other solid structures such as rock or concrete-rock interfaces.

Pile Integrity Tester’ (PIT)

PIT performs Low Strain integrity testing, also called Sonic Echo or Pulse Ecno Testing. The PIT may be used for auger cast-in-place (CFA) piles, drilled shafts, driven concrete piles, concrete filled pipes and timber piles. It detects potentially dangerous defects such as major cracks, necking, soil inclusions or voids and, in some situations, can determine unknown lengths of piles that support existing bridges or towers.

The PIT test consists of attaching an accelerometer to the top or side of the foundation to be tested. The accelerometer acquires data resulting from the impact of a small hand held hammer (instrumented or not). If a defect is present along the shaft, its size and location can be estimated by analyzing the propagation and reflection of the wave induced on the foundation by the ammer impact. It is also possible to estimate the depth of the pile toe.