Pile Testing

▶︎ Soil testing laboratory/ geotechnical investigation.
▶︎ Static pile load test upto 2500t load in compression, pull out, lateral.
▶︎ Dynamic load test of pile.
▶︎ Pile integrity test using pdi.
▶︎ Conducting ndt using ultrasonic, rebound hammer, vibration meter, rebar locator

PIT performs Low Strain integrity testing, also called Sonic Echo or Pulse Ecno Testing. The PIT may be used for auger cast-in-place (CFA) piles, drilled shafts, driven concrete piles, concrete filled pipes and timber piles. It detects potentially dangerous defects such as major cracks, necking, soil inclusions or voids and, in some situations, can determine unknown lengths of piles that support existing bridges or towers.

The PIT test consists of attaching an accelerometer to the top or side of the foundation to be tested. The accelerometer acquires data resulting from the impact of a small hand held hammer (instrumented or not). If a defect is present along the shaft, its size and location can be estimated by analyzing the propagation and reflection of the wave induced on the foundation by the ammer impact. It is also possible to estimate the depth of the pile toe.

▶︎ Current Projects for Pile Foundation & Testing
▶︎ Pile Load Test
▶︎ Dynamic / Pile Integrity Test